The CombiCut series

The CombiCut series

Built for the most extreme environmental variables

Productmenu
Features Technical specifications Control Software Media
Offer request

The CombiCut series | Reliable & flexible

The CombiCut series is a cutting machine that can combine numerous technologies and torches on one portal. Due to its extremely resistant and robust design, it is the ideal production helper even under hard environmental variables and impresses with its enormous reliability even in three-shift operation. Designed for precise oxyfuel cuts, it enables the cutting of material thicknesses up to 300 mm and can also be extended with an additional support for plasma cuts. If required, up to 8 oxyfuel torches can work on the robust portal for the fastest possible parallel cutting operation.

Additionally, the CombiCut can be equipped with the technologies plasma rotator for bevel cuts, 3-torch unit (oxyfuel), drilling units up to 40 mm diameter or various marking tools. The processing of profiles, beams and domes is possible optionally.

"We were convinced by the combination of pipe and sheet metal cutting machine. Of the technology, we liked MicroStep best. We are satisfied with the system, it runs very well," says Pierre Ruble, Production Manager Mecasem – Groupe MM.

Pipe & Profile processingDome processing2D cuttingBevel cuttingDrilling, Tapping, CountersinkingMarkingScanningAutomation

These customers rely on MicroStep and benefit from the CombiCut


"The system works very well, it really runs great. I would buy it again with the exact same configuration."

 

Stefan Hacken,

Head of Steel and Vehicle Construction | Truck-Center Backes GmbH

Features

Extremely resistant and robust - even with difficult environmental variables

Extremely resistant and robust - even with difficult environmental variables

Extreme conditions are a great challenge for any cutting system. Upon request, MicroStep® has a suitable solution for all...

Multi-tool cutting with up to 8 oxyfuel torches

Multi-tool cutting with up to 8 oxyfuel torches

Increase your productivity with parallel cutting operationsPossibility of parallel bevel cutting with several rotator bevel...

Fast and precise bevel cutting with plasma and oxyfuel

Fast and precise bevel cutting with plasma and oxyfuel

Fully automatic and highly precise bevel cutting up to 50° (plasma rotator) or up to 60° (oxyfuel rotator) Bevel...

Cutting with plasma up to 800 A and oxyfuel up to 300 mm

Cutting with plasma up to 800 A and oxyfuel up to 300 mm

CombiCut machines are designed to withstand high workloads in multiple-shift operations including multi-torch parallel oxyfuel...

Fully automatic drilling up to Ø 40 mm and tapping up to M33

Fully automatic drilling up to Ø 40 mm and tapping up to M33

The fully automatic drilling solution provides a substantial added value for your production. Before the parts are cut, precise...

3D pipe & profile processing up to Ø 1,000 mm

3D pipe & profile processing up to Ø 1,000 mm

Enhance your production range by adding pipe and profile cutting optionConvenient cutting program creation with MicroStep’...

Extremely high reliability even in three-shift production

Extremely high reliability even in three-shift production

MicroStep systems are designed for a long machine life – sometimes even under tough environmental conditions. The...

Innovative software solutions: Intuitive and easy operation

Innovative software solutions: Intuitive and easy operation

So that you can fully concentrate on your production, our innovative software solutions help you to intuitively transform...

Ergonomic and uncomplicated: The iMSNC® control system

Ergonomic and uncomplicated: The iMSNC® control system

Apart from the externally positioned control console with ergonomic 24" touch screen display, the system has additional...

Remote Diagnostics

Remote Diagnostics

With iMSNC® and numerous remote maintenance modules, MicroStep offers the best foundation for fast and competent help via...

Training & expert support: Guarantee for high machine availability

Training & expert support: Guarantee for high machine availability

To get the maximum efficiency out of your cutting system, perfectly trained operating personnel is essential. They ensure...

Technical specifications

 

Dimensions

Effective length of work area* 1,500 to 50,000 mm
Effective width of work area* 1,500 to 8,000 mm
* Different configurations on request. The net area of the working zone can be operated with all available tools.

Tools

Possible number of tools 6 (8 oxyfuel)
Possible cutting processes plasma, oxyfuel
Possible cutting processes 2
Maximum material thickness plasma according to plasma source
Maximum material thickness oxyfuel 300 mm

Precision

Positioning speed up to 30,000 mm/min.
Positioning accuracy according to DIN 28206 / ≤ 0.06 mm/m
X, Y axis X axis: milled rails, driven on both sides and helical toothed racks
  Y axis: double linear guides
Z axis ball screw
Gantry type massive steel gantry

Control & software

Control iMSNC®
Main control panel ergonomic 17" touchscreen control panel
Operating system Windows 11 Pro (64-bit)
Additional operating units 2 operating units on the gantry (one on the left side and one on the right side)
 
  All specifications subject to change

 

Software

Software from MicroStep® – developed especially for cutting

To allow you to concentrate fully on your production, our MicroStep® software solutions, drawings and cutting plans help you to intuitively convert them into finished components. Part of our product range also includes automation solutions for the organization of your entire cutting process.

Asper Basic

Asper Basic

Asper Basic is the ideal tool for an easy and fast creation of NC programs for different cutting technologies (plasma, oxyfuel, laser or waterjet).

Asper Nesting

Asper Nesting

With Asper Nesting, you can easily and intuitively nest component drawings into efficient cutting plans.

MicroStep mCAM

MicroStep mCAM

mCAM is an efficient tool for the automated 3D production on pipes, profiles, domes, IPE carriers but also flat sheets with cutting systems of different technologies.

MPM Production Management

MPM Production Management

MPM forms the basis for automated cutting. It automatically nests complex cutting jobs and projects on the right material and distributes the cutting plans to cutting machines for processing.

Control

Handles even the most complex cutting tasks – the iMSNC® machine control

iMSNC® from MicroStep is one of the most advanced control systems for CNC cutting machines. It was developed to easily, reliably, and efficiently turn cutting plans into finished parts with the help of a clear and modern user interface.

MicroStep iMSNC® machine control

The intelligent solution for multi-technology work

iMSNC® from MicroStep is one of the most advanced control systems for CNC cutting machines. It was developed to easily, reliably, and efficiently turn cutting plans into finished parts with the help of a clear and modern user interface. The system’s hardware consists of a stand-alone control console with a TFT touchscreen and a control panel with an LCD display mounted on the gantry. In order to achieve maximum utilization and flexibility of our machines, the ergonomic control console offers the opportunity to nest new cutting programs and generate new CNC codes during an ongoing cutting process. As the iMSNC® control system and all CAM software solutions come from our company, the software with its versatile modules can be individually customized for your production. Parameter databases for individual technologies enable consistently high quality under various circumstances. iMSNC® comes with multiple efficient evaluation tools for production process optimization. These provide you with the much-needed overview of current cutting orders, cutting times, cost calculations and machine utilization in day-to-day production.

 

 

Overview of important performance data:

  • 24’’ touchscreen
  • Efficient management of tool data
  • Very short programming times
  • Fast data transfer
  • Flexible and easy to use
  • Advanced cutting simulation for more work safety
  • Convenient contextual help via pop-up bubbles

 

Media

 3D cutting

3D cutting

 2D cutting

2D cutting

 Drilling, countersinking and tapping

Drilling, countersinking and tapping

 Cutting system

Cutting system

 Marking

Marking

 Pipe and profile processing

Pipe and profile processing

 3D cutting

3D cutting

 Control and operating unit

Control and operating unit

 Cutting samples

Cutting samples

 
References Productcatalog Experience technology live!
phone

Infohotline

+49 8247 96294 00

kontaktkontakt